Description
- Clear, see-through glue sheet
- Thickness: 45 microns (.045 mm)
- Washability: 50+
Application
- Design job and cut KWIK-ADH® in reverse.
- Weed away excess material.
- Pre-heat for 2 seconds to flatten the fabric.
- Lay the adhesive side flat on the heat press. Use a cover sheet.
- Use the Results iMPACT Foils.
- Tack apply at 300° F for 5 seconds.
- Peel warm/hot to expose the adhesive.
- Lay the foil flat, shiny/color side up for 100% edge-to-edge coverage.
- Optional – Crunch for a distressed look.
- Heat and apply firm pressure with a cover sheet 300° F for 15-20 seconds.
- Cold peel away when cooled.
Material/Fabric Compatibility
Suitable for all fabrics, including nylon, Spandex, and Lycra®
Care Instructions
- Machine wash inside-out using mild detergent.
- Do not use bleach.
- Dry at a normal dryer setting on household machines.
- Do not dry clean.
- If necessary, iron the garment inside-out on the lowest setting.
Storage
- Store in a cool, dry area around 65-70° F with 50% relative humidity.
- Keep away from direct heat, sunlight, and humidity.
- Recommended shelf life is one year.
Cutter Instructions
Cricut®
- Blade: Standard
- Setting: Iron-on
Silhouette CAMEO®
- Thickness: 2
- Material Type: HTV Smooth
- Blade: 2
- Speed: 4
Brother® ScanNCut
- Blade: 2
- Speed: 4
- Pressure: 2
GCC i-Craft™
- Blade: .25 mm
- Speed: 15 cm/s
- Pressure: 60-80 g
Roland
- Blade: 45°
- Force: 60-80 g
- Offset: .25
- Speed: 20
Graphtec
- Blade: 45°
- Force: 10
- Offset: 0
- Speed: 20
Note: Always test cut before any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16″ for lettering and logos.
There are no reviews yet.