Description
- Composition: Polyurethane
- Thickness: 75 microns (.075 mm)
- Stretch & Rebound: 4.5
- Washability: 100
- Carrier: Frosted, Non-Pressure Sensitive
Application
- Time: 10 seconds
- Temperature: 320° F
- Pressure: Medium
- Peel: Cold
- Layer: Yes
- Cover & Seal: No
Material/Fabric Compatibility
- 100% Cotton
- 100% Preshrunk Cotton
- 100% Polyester
- Woven Nylon
- Silicone-coated Nylons
- Leather
- Lycra®/Spandex
Care Instructions
- Machine wash inside-out using mild detergent.
- Do not use bleach.
- Dry at a normal dryer setting on household machines.
- Do not dry clean.
- If necessary, iron the garment inside-out on the lowest setting.
Storage
- Store in a cool, dry area around 65-70° F with 50% relative humidity.
- Keep away from direct heat, sunlight, and humidity.
- Recommended shelf life is one year.
Cutter Instructions
Cricut®
- Blade: Standard
- Setting: Iron-on
Silhouette CAMEO®
- Thickness: 16
- Material Type: None
- Blade: 6
- Speed: 5
Brother® ScanNCut
- Blade: 6
- Speed: 5
- Pressure: 16
GCC i-Craft™
- Blade: .25 mm
- Speed: 15 cm/s
- Pressure: 90-110 g
Roland
- Blade: 45°
- Force: 70-90 g
- Offset: .25
- Speed: 30
Graphtec
- Blade: 45°
- Force: 12
- Offset: 0
- Speed: 30
Note: Always test cut before any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16″ for lettering and logos.
Following the recommended settings when applying heat transfer vinyl (HTV) is essential to achieve the best possible results.
When cutting heat transfer vinyl, it is crucial to follow the recommended settings to achieve the desired results and ensure the longevity of the product.
There are no reviews yet.